Thinking about our Masterplan..

The next step for us will be to work towards a masterplan of how to engage with the people of Shannon Town to be more energy efficient.

Our neighbours in Cratloe just published their 43 page plan at:
What I think would be brilliant is if ESB Networks would provide SECs occasional actual supply/generation data from their network.
They already share capacity data:



Comments

Post a Comment

Popular posts from this blog

Field trial of the 1KW (2.4KWh) power station begins

Image
Dropped off the 1KW (2.4KWh) power station with Essam today to get measurements of how much electricity his food truck uses. He would like to purchase an 2000W 1500Wh power station so he can run lights/fridge/etc. when he's off-grid. https://iallpowers.com/products/allpowers-2000w-portable-power-station https://www.youtube.com/watch?v=cScqnOofMRQ So be collecting and analysing the measurements from today should say whether this is possible :) It look likes the van uses less than 40W for lighting and another 300W whenever the fridge compressor kicks in. But I will have detailed info from the sqlite3 database when I retrieve the unit at the end of the day :) Only just portable! Safe home again! After a grand day out :) So the unit was deployed at around 13:30 and removed around 16:30 so around three hours of data. Essam had been there since 12:00 or so so the fridge had 90 mins to cool its contents. Here, is the graph for the power drawn during that time: It can be seen that time on ...
Read more

Started using old 100W PV panels to charge lead-acid 12v leisure batteries

Image
These have been gathering dust in the shed for the last year. So will see if they will still take a charge. The two 100W panels and epever charge controller were recently recovered from being leant to the Shannon Tidy Towns 40' Container. Based on an Epever LS2024B https://shop.thesunpays.co.za/products/epever-ls2024b-solar-charge-controller-20a-pwm And monitored using a Blynk code on a NodeMCU.(A version can be found on my laptop under  Tracer-RS485-Modbus-Blynk-V2.ino as not yet shared to Github) The charging is monitored here..
Read more